Location:Home - News - Industry News
Industry News
Industry News
FBE powder manufacturing process
Font size:SMB

Essential parts of a powder coating manufacturing plant are:

  1. weighting station,
  2. pre-blending station,
  3. an extruder, and
  4. a classifier or grinding unit.

The components of the FBE pipeline coating formulation are weighed and pre-blended in high speed mixers. The mix is then transferred to a high-shear extruder. FBE extruders incorporate a single or dual screw setup, rotating within a fixed clamshell barrel. A temperature range[vague] from 50 °C to 100 °C is used within the extruder barrel. This setup compresses the FBE blend, while heating and melting it to a semi-liquid form. During this process, the ingredients of the molten mix are dispersed thoroughly. Because of the fast operation of the extruder and relatively low temperature within the barrel, the epoxy and hardener components will not undergo a significant chemical reaction. The molten extrudate then passes between cold-rollers and becomes a solid, brittle sheet. It then moves to a “Kibbler”, which chops it into smaller chips. These chips are ground, using high speed grinders (classifiers) to a particle size of less than 150 micrometers (standard specifications requires 100% pass through in 250 micrometer sieves and maximum 3% retains in 150 micrometer sieve). The final product is packaged in closed containers, with particular care given to avoid moisture contamination. Normal storage temperatures of FBE powder paint are below 25 °C (77 °F) in air-conditioned warehouses.


Updated:2017-05-05 | Return
This article keywords: